CALL US

800-634-5178

Tag: connect-pro

NewTek has Gateway to SMPTE ST 2110

By Jim Bask 0 Comment July 11, 2017

NewTek helped us get to compressed IP with NDI. Now they are providing a bridge to uncompressed IP with NC1 Studio I/O IP.

Using NewTek Connect Pro to Monitor NDI Sources from Other Devices

By Jim Bask 0 Comment January 24, 2017

NewTek Connect Pro can serve a variety of video sources as NDI streams for a video production IP workflow, plus give you quality controls for the video streams it provides. The application’s capabilities go beyond the system on which it is installed, however. NewTek Connect Pro can also help you turn any available system or device in your production suite into a multiviewer on which you can monitor any of the available NDI streams present on the network. Yes, you heard that right – you can leverage NewTek Connect Pro on one system from other systems or devices, to make them useful in your production workflow. This is because the application includes NDI Connect Webserver, which can be accessed by other systems and devices on the network. You can then use these to monitor NDI streams from any source on the network. This is not limited to the NDI streams that NewTek Connect Pro is serving.

Networks, Miracles, and Video Production

By Jim Bask 0 Comment December 15, 2016

In a new article, RedShark News examines three of the most important factors that IP workflow offers to video production.  The major emphasis is on how the workflow is able to carry multiple channels at high quality with one network cable as opposed to multiple video cables, one required for each video source.

We’d add a fourth: communication is bi-directional with an IP solution such as NDI…

2-Minute Tutorial: NewTek Connect Pro Automatic Playback Over the IP Video Network

By Jim Bask 0 Comment December 12, 2016

In a previous Tip entry, 2-Minute Tutorial: How to Set Up NewTek™ Connect Pro for Media Playback, we showed how to set up NewTek Connect Pro and add its outputs to a switcher’s inputs. NewTek Connect Pro can be a source for any NDI-enabled production switcher, but there are some additional advantages when you use the application with a TriCaster, and we’ll show you those here. In many ways, using NewTek Connect Pro is like having four more DDRs for a TriCaster.